Tri-comb generation with a dual-ring structure.

By introducing a third measurement comb with different repetition frequencies (Δ f r e p ), the tri-comb spectroscopy technique overcomes the ambiguity problem of the original dual-comb spectroscopy technique and eliminates physical delay stages in multidimensional coherent spectroscopy. Nowadays, tri-comb generation based on three frequency-stabilized comb lasers is overly complicated and costly for many potential applications. Previous research on single-cavity dual-combs inspired research on single-cavity tri-combs. However, the currently reported tri-comb structures cannot achieve independently controllable pulses. This paper shows a dual-ring tri-comb seed-source structure using wavelength-based multiplexing in one of the rings. The wavelength and power of the output pulse are independently controlled by using the dual-ring structure. The Δ f r e p of wavelength multiplexing-based dual-comb output can be tuned by adjusting the intra-ring polarization controller (PC). In the case of single-wavelength mode-locking, the PC can be adjusted to achieve a wavelength tuning range of nearly 20 nm. The tri-comb source could offer an attractive alternative solution as a low-complexity light source for field-deployable multi-comb metrology applications.

Dual-comb fiber laser for stable frequency distribution.

A passive dual-comb laser can generate two optical frequency combs with different repetition frequencies. These repetition differences have high relative stability and mutual coherence through passive common-mode noise suppression without complex tight phase locking from a single-laser cavity. The comb-based frequency distribution requires the dual-comb laser to have a high repetition frequency difference. This paper presents a high repetition frequency difference bidirectional dual-comb fiber laser based on an all-polarization-maintaining cavity configuration and a semiconductor saturable absorption mirror with single polarization output. The proposed comb laser has a standard deviation of 69 Hz and an Allan deviation of 1.17 × 10-7 at τ = 1 s under different repetition frequencies of 12.815 MHz. Moreover, a transmission experiment has been conducted. Owing to the passive common-mode noise rejection capability of dual-comb laser, after passing an 84 km fiber link, the frequency stability of the repetition frequency difference signal is improved by two orders of magnitude than the repetition frequency signal at the receiver side.